Where is the manufacturer of flat lifting straps

Flat lifting belts are made of high-quality synthetic fibers and advanced weaving technology and equipment. They are sewn using different sewing methods and can be produced with safety factors of 4, 5, 6, 7, and 8 times according to customer needs. The production range is 0.5t-100t. Use international standard colors to distinguish different carrying capacities, and also differentiate based on bandwidth. During lifting operations, there will be no damage to the surface of the lifted object

Types of Flat Lifting Belts: ① Loop Eye Flat Lifting Belts a, Single Layer Two End Loop Eye Flat Lifting Belts c, Three Layer Two End Loop Eye Flat Lifting Belts b, Double Layer Two End Loop Eye Flat Lifting Belts d, Four Layer Two End Loop Eye Flat Lifting Belts Note: Loop eyes can be divided into flat loop eyes, reverse loop eyes, folded 1/2 loop eyes from one side, folded 1/2 loop eyes from both sides, and folded 1/3 loop eyes. ② Circular flat lifting belt a, single-layer circular flat lifting belt c, three-layer circular flat lifting belt b, double-layer circular flat lifting belt d, four layer circular flat lifting belt ③ Flat lifting belt with metal accessories a, flat lifting belt with triangular rings at both ends b, stirrup shaped flat lifting belt

Flat lifting straps have a wide load-bearing surface, which can reduce the pressure of surface loads. When lifting objects with smooth and delicate outer surfaces, it will not harm the lifted object. 3. There are various lifting methods available. 4. Polyester is usually used in acidic environments, nylon is used in alkaline environments, and polypropylene has resistance to acidic, alkaline, and most chemical conditions. 5. The surface can be hardened to enhance wear resistance. 6. The temperature range for polyester and nylon lifting belts is -40 ℃~100 ℃, while the temperature range for polypropylene lifting belts is -40 ℃~80 ℃.