Lifute Lifting Equipment Co., Ltd. produces 10 ton lifting belts, 20 ton lifting belts, 30 ton lifting belts, 40 ton lifting belts, and 50 ton two end buckle lifting belts

The LiFu lifting straps produced by LiFu Lifting Appliances Co., Ltd. have 6 times the lifting straps, 5 times the lifting straps, and 4 times the lifting straps. The white lifting belt is four times larger than the lifting belt, with acid and alkali resistance, suitable for lifting paint products, plastic products, machine tools, and pipes, pipelines, etc. that have been surface treated or anti-corrosion and moisturizing. The colored lifting straps are 5, 6, 7, and 8 times the size of the lifting straps, made of high-strength and low elongation polyester filament

The load range of the flat lifting belt is 0-50 tons, and the length range is 1-100 meters.

The 10 ton flat lifting belt is made of PES by weaving and sewing. And reinforced eyelets or metal fittings can be used at both ends of the lifting to increase strength. Flat belts are woven once by a loom and processed using different stitching methods. They are divided into single-layer and double-layer types. The standard tonnage of flat belts can be distinguished not only by color, but also by width. During lifting operations, it can provide a wide and smooth load-bearing surface, which is particularly suitable for lifting objects with soft surfaces. Due to the lack of contact with metal parts, the damage caused to the painted surface of the lifted object is extremely minimal.

The 10 ton flat lifting belt has higher protection against wear and damage. Among the flat lifting belts used in general lifting, due to the superiority of the lifting belt, it can have a relatively long working life. However, at the same time, it is necessary to cooperate with the correct protective cover during lifting operations to prevent the lifting belt from being cut by sharp objects or lifted objects.

The 10 ton circular lifting belt consists of a closed load-bearing core composed of infinitely wrapped and equally arranged fiber bundles, twisted with a single strand of wire. The number of wires in a row reaches more than 100000 cycles, providing load-bearing function.

Circular lifting with circular lifting straps and eye shaped circular lifting straps. The outer layer of the circular lifting belt is a specially designed double-layer wear-resistant sleeve that is connected into a ring shape. The outer sleeve does not bear weight and only provides protection for the parallel arrangement of wire bundles. When the load-bearing core is locally damaged due to severe overloading or long-term use, the outer jacket will first break as a warning to avoid accidents. If there are large cuts on the circular lifting belt sleeve, it must be inspected to see if it can be repaired or continued to be used. In any case, if the user cannot determine the extent of damage, it is best to send the circular lifting belt back to the manufacturer for further inspection.