Lifute Hoisting Co., Ltd. produces coil flipping clamps, steel rolling heavy clamps, automotive loading and unloading steel coil hoisting equipment, and steel coil flipping clamps

The lifting device for loading and unloading vertically placed coil steel using a tilting and flipping steel fixture is called a vertical coil steel lifting device. The vertical coil steel lifting device uses the principle of mechanical shear force to grasp the coil steel vertically placed on one side to complete the loading and unloading of the coil steel. When the lifting point is changed, the coil steel can be changed from vertical to horizontal, or lifted horizontally vertically. It is suitable for 1-40t vertical coil steel.

Tilting and flipping steel coil clamp, plate lifting device, and strip flipping clamp: The opening of the steel coil flipping clamp can be adjusted, and there are three adjustable holes on the clamp to adjust the size of the opening according to one's own needs. The tilting and flipping steel coil clamp is equipped with a seamless steel wire rope. When lifting and flipping the steel coil, one end of the steel wire rope is turned outward (outer diameter). When lifting horizontally, turn one end of the steel wire rope inward (inner diameter). The jaws of the strip flipping pliers are made of forged steel. The key to the service life of a clamp depends on the quality of the forged steel. Good forged steel is hard, durable, and has a long service life.

Steel strip flipping pliers:

1. Mainly used for flipping steel coils for lifting, the lifting process does not require external force (clamped by its own gravity), and the clamping is safe and reliable. Suitable models can be selected based on the lifting frequency and lifting requirements.

2. The two pairs of inner and outer legs of the steel strip flipping pliers move separately, and clamp the two wall thicknesses in the diameter direction during operation.

3. During operation, there is no relative sliding between the clamp and the steel coil, and the steel coil is not damaged during operation.

4. The clamping force of the steel strip flipping clamp on the steel coil is twice smaller than that of a single clamp, resulting in lower contact stress and less stress damage to the steel coil caused by the clamp.

Steel strip flipping pliers: simple to make, small operating space, but complex to operate. It is necessary to ensure that the crane driver has a good view, otherwise ground personnel need to cooperate with the operation. During operation, it is necessary to ensure that the pliers hook to the bottom. The position of steel coils with different widths needs to be adjusted.