Lifute Hoisting Co., Ltd. produces two end buckle large tonnage lifting belts and large tonnage two end buckle flexible lifting belts

The two end buckle large tonnage lifting belt is equipped with lifting ring buckles at both ends of the lifting belt, which is easy to hang the hook and lock and tighten the workpiece as it is lifted.

Precautions for using large tonnage two end buckle flexible lifting straps:

When using a large tonnage two end buckle flexible lifting belt, the flexible sling should be directly hung into the center of the hook force and directly hung at the tip of the hook; During the use of large tonnage two end buckle flexible lifting belts, crossing, twisting, knotting, and twisting are not allowed. The correct lifting specific connectors should be used for connection; The use of large tonnage two end buckle flexible lifting belts must be directed by personnel with relevant qualifications, and overloading is strictly prohibited; When using two lifting straps for operation, hang the two lifting straps directly into the double groove, each hanging at the symmetrical force center position of the double hook; When using four lifting straps, each two straps should be directly hung into the double hook, and attention should be paid to the inner straps not overlapping or squeezing each other. For large tonnage flexible lifting straps with two buckles, they should be symmetrical to the force center of the hook; When encountering goods with sharp corners or edges on the load, it is necessary to use protective sleeves, corner protectors, and other methods to protect the lifting straps, in order to extend the service life of the lifting straps and eliminate safety hazards; Due to the use of flat lifting straps on the curved part of the hook, it cannot be uniformly loaded in the width direction and is affected by the internal force of the hook. When the diameter of the hook is too small and the joint with the webbing eye is sufficient, the correct connecting piece should be used to link it; When lifting pipe like objects, the correct lifting method should be adopted, and the lifting angle should be less than 60 degrees; Objects should not be pressed onto the lifting belt, and attempts to pull the lifting belt out from below should not be made, causing danger. The opening angle of the flexible circular lifting belt eye should not exceed 20 °, and the eye should be avoided from breaking during the lifting process; It is strictly prohibited to use lifting straps on rough surfaces; After using the flexible sling, the hanging storage method should be selected