Lifute Lifting Equipment Co., Ltd. produces vertical lifting flip lifting equipment, vertical lifting flip clamps, steel ingot flip lifting equipment, and aluminum ingot flip lifting equipment

The lifting device for loading and unloading vertically placed coil steel is called a vertical coil steel lifting device. The vertical coil steel lifting device uses the principle of mechanical shear force to grasp the coil steel vertically placed on one side to complete the loading and unloading of the coil steel. When the lifting point is changed, the coil steel can be changed from vertical to horizontal or flipped from horizontal to vertical. It is suitable for 15-40t vertical coil steel.  

Steel strip flipping pliers:

1. Mainly used for flipping and lifting steel coils, the lifting process does not require external force (clamped by its own gravity), and can be clamped. Suitable models can be selected based on the lifting frequency and lifting requirements.  

2. The two pairs of inner and outer legs of the steel strip flipping pliers move separately, and clamp the two wall thicknesses in the diameter direction during operation.  

3. During operation, there is no relative sliding between the clamp and the steel coil, and the steel coil is not damaged during operation.  

4. The clamping force of the steel strip flipping clamp on the steel coil is twice smaller than that of a single clamp, resulting in lower contact stress and less stress damage to the steel coil caused by the clamp.

Vertical lifting and flipping lifting equipment: It is easy to make and has a small working space, but the operation is complicated. It is necessary to ensure that the crane driver has a good view, otherwise ground personnel need to cooperate with the operation. During operation, it is necessary to ensure that the pliers and hooks are hooked to the bottom. The position of steel coils with different widths needs to be adjusted.