Lifute Hoisting Co., Ltd. produces cable mesh covers, cable mesh cover connectors, straight pull cable mesh covers, and cable pull wire mesh covers

Cable net cover is an ideal tool for power construction, which connects various steel core aluminum stranded wires, insulated wires, ground wires, optical fibers, optical cables, and cables during the laying process. It can pass through various types of laying pulleys, has the advantages of light weight, high tensile load, no wire damage, and easy use.

Instructions for using cable mesh cover: After compressing the rear end of the cable mesh cover to open it, insert it into the object being pulled, compress the rope guide section by section, and insert it section by section to ensure that the mesh cover is tightly attached to the object being pulled, such as the cable or oil pipe. After the mesh cover is fully inserted (leaving a gap), tie the opening of the rope guide with zip ties or iron wires. Release the zip ties to compress the rear end of the mesh cover and open it section by section to remove the mesh cover. 1. At the beginning of traction, it is necessary to check whether the mesh sleeve is tightened on the object being pulled. After confirming that it is correct, it can be used normally. 2. Cutting sharp corners of the head of the object being pulled, such as cables and oil pipes, should be treated by wrapping and polishing to prevent sharp corners from cutting the rope sleeve or affecting the expansion and contraction of the mesh sleeve. 3. Local small sliding of the mesh sleeve at the beginning of traction is a normal phenomenon. 4. Before and during use, attention should be paid to checking whether the mesh sleeve has broken wires and the scope of use of the rope guide. If there is a broken wire, it should be scrapped in a timely manner. Mesh sleeves that do not meet the scope of use should not be used. 5. After use, the mesh sleeve should be removed in a timely manner and properly stored to prevent damage to the strands and other components.