LiFu Hoisting Co., Ltd. 18066002268 produces large tonnage lifting belts, large tonnage lifting slings, high tonnage lifting ropes, large tonnage white lifting belts, and wear-resistant protective sleeve lifting belts

Large tonnage lifting straps

Large tonnage lifting slings are produced for lifting and hoisting objects with relatively large tonnage.

Circular large tonnage lifting sling

Precautions for using large tonnage lifting slings:

Overloading is strictly prohibited.

When working with two lifting straps, hang them directly into the double hooks. The lifting straps are hung at the symmetrical force center position of the double hooks; When using four lifting belts, each two lifting belts should be directly hung into the double hook. Note that the lifting belts inside the hook should not overlap or squeeze each other, and the lifting belts should be symmetrical to the force center of the hook.

3. When using the lifting belt, it should be hung directly into the center of the force on the hook, and should not be hung at the tip of the hook.

4. During lifting operations, the lifting straps are not allowed to cross or twist, knot or twist, and the correct lifting strap connectors should be used for connection.   

When encountering goods with sharp corners or edges on the load, protective measures such as sheathing and corner protectors must be taken to protect the lifting straps and extend their service life. It is strictly prohibited to use suspenders on rough surfaces. To prevent the sling from being cut off by sharp edges and rough surfaces.

6. Double turn choke bundling is safer.

When using a lifting belt, the curved part of the hook makes it difficult for the flat lifting belt to bear evenly in the width direction, which is affected by the inner diameter of the hook. When the diameter of the hook is too small, the connection with the webbing eye is insufficient, and the correct connector should be used for connection.

8. When lifting pipe like objects, the correct lifting method should be adopted. If the lifting angle is too high, it will cause safety hazards.

9. Items should not be pressed onto the lifting belt, as it may cause damage to the lifting belt. It is not advisable to attempt to pull out the lifting belt from below, as it may pose a danger. Use objects to cushion and leave enough space for the lifting belt to be smoothly removed.

10. Lifting straps should not be pulled or dragged on the ground or rough surfaces.

11. After use, the lifting belt should be stored in a suspended manner.